ZTW AL Programmable 12A ESC with Connectors


ZTW AL-Series 12A Programmable ESC speed controller with a JST battery connector and 2mm motor bullet connectors soldered on for you. The ZTW AL-Series Programmable Brushless 12AMP ESC has extremely low internal resistance and provides smooth/accurate linear power for brushless motors.

12A ESC Programming Manual PDF


  • Amp rating: 12A
  • Burst Rate (10sec): 16A
  • BEC Output : 5.0V / 1A (1.5A Max)
  • Voltage: 7.4-11.1V (2-3 cell Lipo/5-10 NiCd)
  • Dimensions: 22x21x4mm
  • Weight: 9g w/out connectors
  • Pre-installed JST battery connector and 2mm motor bullet connectors
  • Features/Programming:
  • Power arming protection (prevents the motor from accidentally running when switched ON)
  • Auto throttle shut down in signal lose situation
  • Temperature protection: Reduce power when temperature reaches 120C
  • Programmable: By transmitter or optional programming card
  • Brake setting: On/Off (factory default is off)
  • Voltage Cutoff: 2.8v/3.0v/3.2v
  • Timing Degrees: Auto(7-30)/Low(7-22)/High(22-30)
  • Start: Start/Soft/Very Soft
  • Low current protection: Ignore/Reduce power/Shut off
  • PWM frequency: 8Khz/16Khz
  • Battery: Lipo, NiMH
  • Motor Rotation: forward/reverse (no need to have to swap wires)
  • Factory Default Restore

  • Sold Out

    To be notified when this product is back in stock please click here.

    • Model: ZTW_12A_ESC_with_Connectors
    • Shipping Weight: 0.0264lbs

    This product was added to our catalog on Wednesday 27 June, 2012.

    Let us notify you when this product is back in stock!

    Simply enter your details below and we will send you an e-mail when “ZTW AL Programmable 12A ESC with Connectors” is back in stock!

    We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!

    Copyright © 2019 RCPlaneBuilder.com
    RCPB logo & site images courtesy of Right Coast Graphix