1.5 in Round Motor Mount Blank

$1.50

These are 2 hand cut 1 1/2" 2.5g round plywood electric motor mounts that work with all our Suppo motors. They have the 1/4" center hole to allow the motor shaft/clip that protrudes out of the back of some motors to turn freely. I've used these a lot and they work very well when glued to the firewall of your foamy. For profile foam planes I glue small foam "web" wedges between the horizontal and vertical front fuse to give more surface. I recommend hot glue (sparingly) or Welder adhesive for attachment to the firewall. I use spare servo mount screws for the motor mount since I glue in my servos and don't use them. I lay the motor mount down on the ply and create a dimples with a small screwdriver or awl and then drill small pilot holes.

Specifications

  • QTY: 2
  • Diameter: 1 1/2"
  • Material: 1/8" medium plywood
  • Center Hole: 1/4"
  • Weight: 2.5g ea

  • Sold Out

    To be notified when this product is back in stock please click here.

    • Model: 1.5 in Round Motor Mount Blank
    • Shipping Weight: 0.00571lbs


    This product was added to our catalog on Thursday 19 May, 2011.

    Let us notify you when this product is back in stock!

    Simply enter your details below and we will send you an e-mail when “1.5 in Round Motor Mount Blank” is back in stock!

    We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!





    Copyright © 2017 RCPlaneBuilder.com
    RCPB logo & site images courtesy of Right Coast Graphix